High Density Polyethylene (HDPE)
Polietilene an alta densità (HDPE)
High density polyethylene is a PE variant characterised by a highly linear molecular structure with minimal branching, which confers high density (0.940-0.970 g/cm³), stiffness, superior chemical resistance and a higher melting point than low-density variants (approximately 125-135 °C). These properties make it suitable for applications requiring mechanical strength, chemical resistance and good performance at relatively elevated temperatures, without however reaching the gas-barrier level of PET.
In packaging, HDPE is widely used as a moulded material: bottles and containers for food products, cosmetics, detergents and pharmaceuticals, produced by blow moulding; closures and caps by injection moulding; jerrycans and industrial containers.
It is also used as a film for high-strength bags. It is not suitable for oven use but can be used for pasteurised products. Grades incorporating recycled content (rHDPE) are increasingly common across food and non-food packaging supply chains, supported by improving separate-collection and sorting infrastructure in Europe.
Typical thicknesses for packaging films (high-strength bags): 8-30 µm.
Il polietilene ad alta densità è una variante del PE contraddistinta da una struttura molecolare altamente lineare con ramificazioni minime, che conferisce densità elevata (0,940-0,970 g/cm³), rigidità, resistenza chimica superiore e punto di fusione più alto rispetto alle varianti a bassa densità (circa 125-135 °C). Queste caratteristiche lo rendono adatto a impieghi che richiedono resistenza meccanica, protezione da agenti chimici e buona performance a temperature relativamente elevate, senza tuttavia raggiungere il livello barriera ai gas del PET.
Nel confezionamento è ampiamente impiegato come materiale stampato: flaconi e contenitori per prodotti alimentari, cosmetici, detergenti e farmaci, prodotti mediante stampaggio a soffiaggio; tappi e chiusure per stampaggio a iniezione; taniche e contenitori industriali. È impiegato anche come film per sacchetti ad alta resistenza. Non è adatto all'uso in forno ma può essere impiegato per prodotti pastorizzati.
Le versioni con contenuto riciclato (rHDPE) sono sempre più diffuse nelle filiere del packaging alimentare e non alimentare, supportate da infrastrutture di riciclo in continuo sviluppo in Europa.
Spessori tipici per film di confezionamento (sacchetti ad alta resistenza): 8-30 µm.
Famiglia morfologica
Fornitori di materiali
—
—